Insulation support anchor A2 Stainless ISA-S 80/40

£ 144.64 £ 144.64 144.64000000000001 GBP / 250

£ 153.93 / 250 not combination_info.get('is_rental')

Drill Hole Depth
- 45mm
Embedment Depth
- 40mm
Max. Thickness
- 40mm
Material
- A2 stainless steel
Head Diameter
- 35mm

This combination does not exist.

ADD TO CART

For insulation up to 40mm, Length 80mm, Drill Hole Depth 45mm, Embedment Depth 40mm, Head Diameter 35mm

Available Stock: 19.00 x 250

Incl. Future Stock: 19.00 x 250

Drill Hole Depth: 45mm

Embedment Depth: 40mm

Max. Thickness: 40mm

Material: A2 stainless steel

Head Diameter: 35mm

Unit of Measure Name: 250
Internal Reference: ISA2-80
Technical Datasheet:
Shipment: Shipped from our warehouse

NEED INFO / PRICING?
0161 672 3333

Terms & Conditions

Related Items:

Insulation retainer disc 80mm A2 stainless ISA-S D

Available Stock: 68.00 x 250

Incl. Future Stock: 68.00 x 250

Insulating anchor for cold-, heat- and fire-protection

The A2 or Zinc-Plated fire rated insulation support anchor. Simply hammer the anchor into the prepositioned insulation, and the anchor will expand into the substrate, securing the load. The hammer

installation allows fast setting and reducing the amount of work.

Features

Approved for multiple fastenings of insulation panels
High load-bearing capacity in cracked and non-cracked concrete
Small drill holes
Can be coated to any colour within around 5 – 10 working days
Quick and safe installation

Applications

Approved for C20/25 – C50/60 concrete
Approval in both cracked and non-cracked concrete

The fire rated insulation support anchor available in either A2 Stainless and Zinc-Plated Steel. Simply hammer the anchor into the pre-positioned insulation, and the anchor will expand into the substrate, securing the load. The hammer installation allows fast setting and reducing the amount of work.

Approved for C20/25 – C50/60 concrete
Approval in both cracked and non-cracked concrete
Approved for multiple fastenings of insulation panels
High load-bearing capacity in cracked and non-cracked concrete
Small drill holes
Quick and safe installation

Technical Characteristics Without Fire Exposure

ISA-S / ISA-Z Insulation Anchor
Drill Bit Diameter	d0	[mm]	8
Depth of Drill Hole	h1 ≥	[mm]	45
Effective Anchorage Depth	hef ≥	[mm]	40
Minimum Thickness of Member	hmin	[mm]	80
Edge Distance	c	[mm]	60
Spacing	s	[mm]	120
Permissible load in cracked and non-cracked concrete C20/25 – C50/60¹ʾ²ʾ	Nzul	[kN]	0.074

The partial safety factor for material resistance from the approval yM = 1.5 as well a partial safety factor for load actions yF = 1.4 were considered for determining the load

Technical Characteristics Under Fire Exposure

ISA-S / ISA-Z Insulation Anchor
Fire Resistance Class
R 30	Permissible Load Ffi,per,30 1)	[kN]	0.09
R 60	Permissible Load Ffi,per,60 1)	[kN]	0.09
R 90	Permissible Load Ffi,per,90 1)	[kN]	0.09
R 120	Permissible Load Ffi,per,120 1)	[kN]	0.09
R 180	Permissible Load Ffi,per,180 1)	[kN]	0.06
R 30 – R 120	Spacing sfi Edge Distance cfi	[mm]	120

The partial safety factor for material resistance from the approval yM = 1.0 as well a partial safety factor for load actions yF = 1.0 were considered for determining the load.

Installation Instructions

Set drill hole
Clean out drill hole from the base
Knock insulation fastener through the insulation panel with a hammer
Anchor disc must fully contact the insulation panel

Minimum 4 anchors per square meter for insulation panel. The dimension between axes and edge distance is valid without fire exposure. Assumed that an application is forced with fire exposure.