Insulation support anchor A2 Stainless ISA-S 250/210

    £ 162.75 £ 162.75 162.75 GBP / 200

    £ 162.75 / 200

    This combination does not exist.


    Available Stock: 12.00 x 200
    Incl. Future Stock: 36.00 x 200

    For insulation up to 210mm, Length 250mm, Drill Hole Depth 45mm, Embedment Depth 40mm, Head Diameter 35mm



    Unit of Measure Name: 200
    Internal Reference: ISA2-250
    Technical Datasheet:

     NEED INFO / PRICING?
     0161 672 3333


    Terms & Conditions

    The fire rated insulation support anchor available in either A2 Stainless and Zinc-Plated Steel. Simply hammer the anchor into the pre-positioned insulation, and the anchor will expand into the substrate, securing the load. The hammer installation allows fast setting and reducing the amount of work.

    • Approved for C20/25 – C50/60 concrete
    • Approval in both cracked and non-cracked concrete
    • Approved for multiple fastenings of insulation panels
    • High load-bearing capacity in cracked and non-cracked concrete
    • Small drill holes
    • Quick and safe installation

    Technical Characteristics Without Fire Exposure

    ISA-S / ISA-Z Insulation Anchor

    Drill Bit Diameter

    d0

    [mm]

    8

    Depth of Drill Hole

    h1         ≥

    [mm]

    45

    Effective Anchorage Depth

    hef        ≥

    [mm]

    40

    Minimum Thickness of Member

    hmin

    [mm]

    80

    Edge Distance

    c

    [mm]

    60

    Spacing

    s

    [mm]

    120

    Permissible load in cracked and non-cracked concrete C20/25 – C50/60¹ʾ²ʾ

    Nzul

    [kN]

    0.074

    The partial safety factor for material resistance from the approval yM = 1.5 as well a partial safety factor for load actions yF = 1.4 were considered for determining the load

    Technical Characteristics Under Fire Exposure

    ISA-S / ISA-Z Insulation Anchor

    Fire Resistance Class

    R 30

    Permissible Load Ffi,per,30 1)

    [kN]

    0.09

    R 60

    Permissible Load Ffi,per,60 1)

    [kN]

    0.09

    R 90

    Permissible Load Ffi,per,90 1)

    [kN]

    0.09

    R 120

    Permissible Load Ffi,per,120 1)

    [kN]

    0.09

    R 180

    Permissible Load Ffi,per,180 1)

    [kN]

    0.06

    R 30 – R 120

    Spacing sfi 

    Edge Distance cfi

    [mm]

    120

     The partial safety factor for material resistance from the approval yM = 1.0 as well a partial safety factor for load actions yF = 1.0 were considered for determining the load.

    Installation Instructions

    Installation Instructions

    1. Set drill hole
    2. Clean out drill hole from the base
    3. Knock insulation fastener through the insulation panel with a hammer
    4. Anchor disc must fully contact the insulation panel

    Minimum 4 anchors per square meter for insulation panel. The dimension between axes and edge distance is valid without fire exposure. Assumed that an application is forced with fire exposure.