Certifix CFTBII4-10x130/50 A4 stainless steel through bolt

https://certifix.co.uk/web/image/product.template/9281/image_1920?unique=975ee19

Price on Application

  • Length
  • Thread Length
  • Material
  • Size
  • Drill diameter
  • Thread
  • Seismic-Approval

This combination does not exist.

Ideal for fixed and sliding point helping hand brackets in cracked and non-cracked concrete.


Length: 130mm
Thread Length: 85mm
Material: A4 stainless steel
Size: M10
Drill diameter: 10mm
Thread: M10 x 85mm
Seismic-Approval: C1 / C2

Unit of Measure Name: 50
Internal Reference: CFTBII4-10x130/50
Technical Datasheet:

 NEED INFO / PRICING?
 0161 672 3333


Terms & Conditions

Description


The Certifix CFTB II Through Bolt Anchor combines variable anchorage depths with the highest approved tensile and shear loads to set new standards in performance and flexibility for mechanical expansion anchors.


Ideal for anchoring medium to heavy loads in facades, cracked and non-cracked concrete, steel beams, cable and pipe routes and wooden constructions, the Certifix CFTB II allows higher loads in the same depth settings as before, which can be further increased by a deeper setting. This can also mean savings on fixing points or fastenings and reduced drilling and setting.


Through the combination of the highest approved tensile and shear loads with variable anchorage depths, the newly developed Certifix CFTB II Through Bolt Anchor with European Technical Assessment, sets standards in performance and flexibility of mechanical Expansion anchors.


In many cases, with the same setting depth as before, the CFTB II allows higher loads, which can be further increased by deeper setting. This can save fixing points or fastenings can be realised, that have not been possible with a through bolt anchor. However, setting with a reduced anchorage depth reduces drilling and setting effort and reduces the risk of reinforcement hits. The innovative calculation method in dependence of anchorage depth and concrete thickness, enables smallest centre and edge distances for the respective application. This flexibility allows a perfect adaptation to the installation situation and allows more economical fastenings. By optimization of the material, the geometry and the manufacturing process, performance under the influence of earthquakes was significantly increased.


This performance and flexibility allows an optimal adaptation to the installation situation and for example enables railing fastenings with less mounting points, smaller anchor plates and larger post spacing, as has been possible with wedge anchors so far. Fewer turns until the tightening torque is reached and a coloured marking of the minimum anchorage depth enable shorter processing times with higher installation safety.

Features
  • The Certifix CFTB II Through Bolt Anchor offers low minimum anchorage depths

  • Increased flexibility of depth allows adaptation to a variety of installation situations

  • Setting with a reduced anchorage depth reduces drilling and the risk of reinforcement hits

  • Enables the smallest centre and edge distances for the respective application

  • Fewer turns until the tightening torque is reached for shorter processing times

  • Coloured marking of the minimum anchorage depth for higher installation safety

  • Anchoring of medium to heavy loads in cracked and non-cracked concrete:
  • Columns
  • Steel beams
  • Railings
  • Cable routes
  • Pipe routes
  • Wooden constructions
  • Consoles
  • Facades
  • Fastenings in earthquake areas.


  • Cracked or non-cracked concrete
  • ETAG 001 
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.