fischer FAZ II PLUS 10/20 K ZP M10 x 43 zinc through bolt [564673]

  • GTIN (EAN Code)
  • Drill diameter
  • Min. drill hole depth for through fixings
  • Anchor length
  • Width across nut
  • Thread
  • Seismic-Approval

£ 108.63 £ 108.63 108.63 GBP / 25

£ 108.63 / 25

This combination does not exist.

Fischer FAZ II PLUS For highest demands. Powerful and flexible.

GTIN (EAN Code):4048962462982
Drill diameter:10mm
Min. drill hole depth for through fixings:75mm
Anchor length:85mm
Width across nut:17mm
Thread:M10 x 43mm
Seismic-Approval:C1 / C2

Unit of Measure Name: 25
Internal Reference: 564673

 0161 672 3333

Terms & Conditions


Fischer FAZ II Plus is a high-tensile strength steel anchor for non-cracked/cracked concrete. It uses a tried-and-tested expansion clip to safely introduce loads into the concrete, enabling an immediately loadable high load-bearing capacity. It is ideal for anchoring railings, cable trays, and consoles.

Product Features

  • No need for drill hole cleaning (M8-M24): Quick and easier assembly.

  • Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fibre concrete, solid sand-lime brick): Increase the number of applications and fields of use.

  • With the new assessment (ETA), the tensile strengths increase decisively: Fewer fixing points and anchors are required.

  • ETA evaluation, together with other test reports (RWS, ZTV, ETK): High loads in case of fire.

  • Variable anchorage depths: Allows a millimetre-accurate adjustment to the loads.

  • The FAZ II Plus allows the absorption of high seismic loads of performance category C1 with and without the use of the filling disc FFD at installation: Flexible.

  • Steel constructions

  • Guard rails

  • Consoles

  • Ladders

  • Cable trays

  • Machines

  • Staircases

  • Façades

  • Timber constructions

Building Materials

Approved for:

  • Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

  • Concrete C12/15 (classification available)

  • Concrete C80/95 (classification available)

  • Steel fibre concrete (classification available)

  • Solid sand-lime brick (classification available)

You can find detailed information on building materials in the registration document.

  • ETA-19/0520

  • DoP 0334

  • ESR-2948


  • The FAZ II PLUS is suitable for pre-positioned and push-through installation, and is also ideal for stand-off installation thanks to the long thread.

  • When applying the torque, the cone bolt is pulled into the expansion sleeve and expand it against the drill hole wall.

  • The anchor is set in line with the approval once the preset installation torque is achieved.

  • In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.

    Mounting Strip 1 Picture

Mounting Strip 1 PictureMounting Strip 1 PictureMounting Strip 1 PictureMounting Strip 1 PictureMounting Strip 1 Picture

Mounting Strip 2 Picture

Mounting Strip 3 Picture

Document NameDownload
Declaration of Performance

ETA Approval

Load Table

Similar Products

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.