fischer FAZ II PLUS 12/10 GS ZP M12 x 110 zinc through bolt [564648]

https://certifix.co.uk/web/image/product.template/8382/image_1920?unique=9daf00c

£ 148.05 £ 148.05 148.05 GBP / 20

£ 148.05 / 20 not combination_info.get('is_rental')

  • GTIN (EAN Code)
  • Drill diameter
  • Min. drill hole depth for through fixings
  • Anchor length
  • Max. usable length hef,stand./hef,min.
  • Width across nut
  • Thread
  • Seismic-Approval

This combination does not exist.

Fischer FAZ II PLUS For highest demands. Powerful and flexible.


GTIN (EAN Code): 4048962462739
Drill diameter: 12mm
Min. drill hole depth for through fixings: 100mm
Anchor length: 110mm
Max. usable length hef,stand./hef,min.: 10 / 30mm
Width across nut: 19mm
Thread: M12 x 61mm
Seismic-Approval: C1 / C2

Unit of Measure Name: 20
Internal Reference: 564648

 NEED INFO / PRICING?
 0161 672 3333


Terms & Conditions


Description

Fischer FAZ II Plus GS with a large washer is a high-tensile strength steel anchor for non-cracked/cracked concrete. It uses a tried-and-tested expansion clip to safely introduce loads into the concrete, enabling an immediately loadable high load-bearing capacity. It is ideal for anchoring railings, cable trays, and consoles.


Product Features


  • The FAZ II Plus GS features a  pre-assembled washer: Helps to reduce installation effort for components with slots.

  • No need for drill hole cleaning (M8-M24): Quick and easier assembly.

  • Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fibre concrete, solid sand-lime brick): Increase the number of applications and fields of use.

  • With the new assessment (ETA), the tensile strengths increase decisively: Fewer fixing points and anchors are required.

  • ETA evaluation, together with other test reports (RWS, ZTV, ETK): High loads in case of fire.

  • Variable anchorage depths: Allows a millimetre-accurate adjustment to the loads.

  • An external independent assessment confirms the service life of anchorages up to 120 years: The FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16).

  • Anchor plates with slotted holes

  • Façade sub-structures with slotted holes.

  • Timber constructions.

  • Tension anchor.

  • Anchoring of wooden beams.

Approved for:

  • Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

  • Concrete C12/15 (classification available)

  • Concrete C80/95 (classification available)

  • Steel fibre concrete (classification available)

  • Solid sand-lime brick (classification available)

You can find detailed information on building materials in the registration document.

  • ETA-19/0520

  • DoP 0334

Functionality

  • The FAZ II PLUS GS is suitable for pre-positioned and push-through installation, and is also ideal for stand-off installation thanks to the long thread.

  • When applying the torque, the cone bolt is pulled into the expansion sleeve and expand it against the drill hole wall.

  • The anchor is set in line with the approval once the preset installation torque is achieved.

  • In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.

Mounting Strip 1 PictureMounting Strip 1 PictureMounting Strip 1 PictureMounting Strip 1 PictureMounting Strip 1 Picture




Document NameDownload
Declaration of Performance


ETA Approval


ICC Approval


Load Table


Load Table (Dynamic)

Similar Products

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.