fischer FAZ II PLUS 12/10 HCR M12 x 110 stainless steel through bolt [564640]

  • GTIN (EAN Code)
  • Drill diameter
  • Min. drill hole depth for through fixings
  • Anchor length
  • Max. usable length hef,stand./hef,min.
  • Width across nut
  • Thread
  • Seismic-Approval

£ 627.17 £ 627.17 627.17 GBP / 10

£ 627.17 / 10

This combination does not exist.


Fischer FAZ II PLUS For highest demands. Powerful and flexible.


GTIN (EAN Code):4048962462654
Drill diameter:12mm
Min. drill hole depth for through fixings:100mm
Anchor length:110mm
Max. usable length hef,stand./hef,min.:10 / 30mm
Width across nut:19mm
Thread:M12 x 61mm
Seismic-Approval:C1



Unit of Measure Name: 10
Internal Reference: 564640

 NEED INFO / PRICING?
 0161 672 3333


Terms & Conditions


Description

Fischer FAZ II Plus HCR is a high-tensile strength, highly corrosive resistant, stainless steel anchor for non-cracked/cracked concrete. It uses a tried-and-tested expansion clip to safely introduce loads into the concrete, enabling an immediately loadable high load-bearing capacity. It is ideal for anchoring railings, cable trays, and consoles.


Product Features

  • No need for drill hole cleaning (M8-M24): Quick and easier assembly.

  • Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fibre concrete, solid sand-lime brick): Increase the number of applications and fields of use.

  • With the new assessment (ETA), tensile strengths increase decisively: Fewer fixing points and anchors are required.

  • The ETA evaluation, together with other test reports (RWS, ZTV, ETK): High loads in case of fire.

  • Variable anchorage depths: Allows a millimetre-accurate adjustment to the loads.

  • External independent assessment confirms the service life of anchorages up to 120 years: The FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16).

  • The FAZ II Plus allows the absorption of high seismic loads of performance category C1 with and without the use of the filling disc FFD at installation: Flexible.
  • Steel constructions

  • Guard rails

  • Consoles

  • Ladders

  • Cable trays

  • Machines

  • Staircases

  • Façades

  • Timber constructions

Approved for:

  • Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

  • Concrete C12/15 (classification available)

  • Concrete C80/95 (classification available)

  • Steel fibre concrete (classification available)

  • Solid sand-lime brick (classification available)

You can find detailed information on building materials in the registration document.

Certification
  • ETA-19/0520

  • DoP 0334

  • ESR-2948

  • 3023222


Functionality

  • The FAZ II PLUS HCR is suitable for pre-positioned and push-through installation, and is also ideal for stand-off installation thanks to the long thread.

  • When applying the torque, the cone bolt is pulled into the expansion sleeve and expand it against the drill hole wall.

  • The anchor is set in line with the approval once the preset installation torque is achieved.

  • In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.

Mounting Strip 1 PictureMounting Strip 1 PictureMounting Strip 1 PictureMounting Strip 1 PictureMounting Strip 1 Picture




Document NameDownload
Declaration of Performance


ETA Approval


ICC Approval


Load Table


Load Table (Dynamic)
FM Approval

Similar Products

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.