fischer FAZ II PLUS 24/60 ZP M24 x 235 zinc through bolt [564606]

https://certifix.co.uk/web/image/product.template/8379/image_1920?unique=9daf00c

£ 366.03 £ 366.03 366.03000000000003 GBP / 5

£ 366.03 / 5 not combination_info.get('is_rental')

  • GTIN (EAN Code)
  • Drill diameter
  • Min. drill hole depth for through fixings
  • Anchor length
  • Max. usable length hef,stand./hef,min.
  • Width across nut
  • Thread
  • Seismic-Approval

This combination does not exist.

Fischer FAZ II PLUS For highest demands. Powerful and flexible.


GTIN (EAN Code): 4048962462319
Drill diameter: 24mm
Min. drill hole depth for through fixings: 215mm
Anchor length: 235mm
Max. usable length hef,stand./hef,min.: 60 / -mm
Width across nut: 36mm
Thread: M24 x 88mm
Seismic-Approval: C1 / C2

Unit of Measure Name: 5
Internal Reference: 564606

 NEED INFO / PRICING?
 0161 672 3333


Terms & Conditions


Description

Fischer FAZ II Plus is a high-tensile strength steel anchor for non-cracked/cracked concrete. It uses a tried-and-tested expansion clip to safely introduce loads into the concrete, enabling an immediately loadable high load-bearing capacity. It is ideal for anchoring railings, cable trays, and consoles.


Product Features


  • No need for drill hole cleaning (M8-M24): Quick and easier assembly.

  • Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fibre concrete, solid sand-lime brick): Increase the number of applications and fields of use.

  • With the new assessment (ETA), the tensile strengths increase decisively: Fewer fixing points and anchors are required.

  • New ETA: Confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.

  • ETA evaluation, together with other test reports (RWS, ZTV, ETK): High loads in case of fire.

  • Fast installation process of the FAZ II Plus: Provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point.

  • Variable anchorage depths: Allows a millimetre-accurate adjustment to the loads.

  • The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation.: Flexible.

  • Steel constructions

  • Guard rails

  • Consoles

  • Ladders

  • Cable trays

  • Machines

  • Staircases

  • Façades

  • Timber constructions

Approved for:

  • Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

  • Concrete C12/15 (classification available)

  • Concrete C80/95 (classification available)

  • Steel fibre concrete (classification available)

  • Solid sand-lime brick (classification available)

You can find detailed information on building materials in the registration document.

Certification
  • ETA-19/0520

  • ETA-20/0897

  • DoP 0334

  • DoP 0337

  • ESR-2948

  • 3023222


Functionality

  • The FAZ II PLUS is suitable for pre-positioned and push-through installation, and is also ideal for stand-off installation thanks to the long thread.

  • When applying the torque, the cone bolt is pulled into the expansion sleeve and expand it against the drill hole wall.

  • The anchor is set in line with the approval once the preset installation torque is achieved.

  • In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.

Mounting Strip 1 PictureMounting Strip 1 PictureMounting Strip 1 PictureMounting Strip 1 PictureMounting Strip 1 Picture




Document NameDownload
Declaration of Performance


ETA Approval


ICC Approval


Load Table


Load Table (Dynamic)
FM Approval

Similar Products

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.