fischer FAZ II PLUS 6/10 ZP M6 x 65 zinc through bolt [564572]

  • GTIN (EAN Code)
  • Drill diameter
  • Min. drill hole depth for through fixings
  • Anchor length
  • Max. usable length hef,stand./hef,min.
  • Width across nut

£ 56.73 £ 56.73 56.730000000000004 GBP / 50

£ 56.73 / 50

This combination does not exist.

Fischer FAZ II PLUS For highest demands. Powerful and flexible.

GTIN (EAN Code):4048962461978
Drill diameter:6mm
Min. drill hole depth for through fixings:60mm
Anchor length:65mm
Max. usable length hef,stand./hef,min.:10 / -mm
Width across nut:10mm

Unit of Measure Name: 50
Internal Reference: 564572

 0161 672 3333

Terms & Conditions


Fischer FAZ II Plus is a high-tensile strength steel anchor for non-cracked/cracked concrete. It uses a tried-and-tested expansion clip to safely introduce loads into the concrete, enabling an immediately loadable high load-bearing capacity. It is ideal for anchoring railings, cable trays, and consoles.

Product Features

  • The first bolt anchor M6 with ETA evaluation option 1: Ensures a safe and approved anchorage.

  • Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fibre concrete, solid sand-lime brick): Increase the number of applications and fields of use.

  • With the new assessment (ETA), the tensile strengths increase decisively: Fewer fixing points and anchors are required.

  • ETA evaluation, together with other test reports (RWS, ZTV, ETK): High loads in case of fire.

  • Variable anchorage depths: Allows a millimetre-accurate adjustment to the loads.

  • Steel constructions

  • Guard rails

  • Consoles

  • Ladders

  • Cable trays

  • Machines

  • Staircases

  • Façades

  • Timber constructions

Approved for:

  • Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

  • Concrete C12/15 (classification available)

  • Concrete C80/95 (classification available)

  • Steel fibre concrete (classification available)

  • Solid sand-lime brick (classification available)

You can find detailed information on building materials in the registration document.

  • ETA-19/0520

  • DoP 0334

  • ESR-2948


  • The FAZ II Plus is suitable for pre-positioned and push-through installation, and is also ideal for stand-off installation thanks to the long thread.

  • When applying the torque, the cone bolt is pulled into the expansion sleeve and expand it against the drill hole wall.

  • The anchor is set in line with the approval once the preset installation torque is achieved.

  • In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.

Mounting Strip 1 PictureMounting Strip 1 PictureMounting Strip 1 PictureMounting Strip 1 PictureMounting Strip 1 Picture

Document NameDownload
Declaration of Performance

ETA Approval

ICC Approval

Load Table

Load Table (Dynamic)

Similar Products

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.