fischer ULTRACUT FBS II 6 x 40/5 LP pan head T30, zinc concrete screw 
The UltraCut FBS II 6 P / LP is perfectly designed for applications like fixings of pipe routes, channel systems, ventilation ducts and facilities in the building service engineering.
Unit of Measure Name:
Internal Reference: 546379
Manufactured from Zinc-plated steel, with pan head the Ultracut FBS II P is ideal for tight-fitting spaces. Designed for use in applications such as channel systems, pipe routes, ventilation ducts, etc. Ultracut FBS has ETA Approval for cracked and non-cracked concrete as well as seismic loads, and classification in fire resistance class R 120. The UltraCut FBS II P is perfectly designed for applications such as fixings of pipe routes, channel systems, ventilation ducts and facilities in the building service engineering. When the concrete screw is screwed into the drill hole using an impact driver, the thread flanks cut deep into the concrete, thus ensuring top load-bearing capacity. The low drilling effort saves time in the case of multiple fixations.
The first concrete screw with diameter 6 and variable embedment depths: High flexibility and a precise adaption on the loads.
ETA assessment option 1 includes the use in cracked and non-cracked concrete: Highest safety requirements.
First 6 mm diameter concrete screw with an ETA assessment for C1 seismic performance category for additional safety standards: Pioneering technology.
Approved for multiple use of non-load bearing systems: Ideal for the installation of pipe routes, cable trays and prestressed hollow concrete ceilings.
Drill holes do not need to be cleaned during vertical installation (ceiling and floor): Fast installation (Note: For floor fixings, the hole must be drilled 3x drill hole diameter deeper).
Different head designs available: Maximum application flexibility.
Hexagonal head with pressed washer and ribs under the head: Prevents accidental loosening of the anchor, making the system more secure.
Special head geometry for use in mounting rails with a socket (SW10): Simple installation of the add-on part.
Approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again: Precision fixing.
For use in masonry (solid building material): Versatile anchoring.
- Pan head: Thanks to their rounded design, they do not present any sharp corners or edges.
Suspension for individual pipes
Suspended mounting rails
Prestressed concrete hollow core ceilings
Concrete C20/25 to C50/60, cracked and non-cracked
Prestressed hollow concrete ceilings C30/37 to C50/60 for the multiple use of non-load bearing systems
Also suitable for:
Masonry with a dense structure
Solid building materials
DoP No. 0146
DoP No. 0147