fischer ULTRACUT FBS II 10x120 35/- SK R countersunk head TX50, A4 stainless concrete screw [543586]

https://certifix.co.uk/web/image/product.template/6397/image_1920?unique=5a102df

£ 363.34 £ 363.34 363.34000000000003 GBP / 50

£ 363.34 / 50 not combination_info.get('is_rental')

    This combination does not exist.

    High performance concrete screw that allows for adjustment during installation.



    Unit of Measure Name: 50
    Internal Reference: 543586

     NEED INFO / PRICING?
     0161 672 3333 
     


    Terms & Conditions

    Description 

    The fischer ULTRACUT FBS II SK R Stainless steel concrete screws with specially hardened red tips are a versatile choice for a variety of applications. They are resistant to corrosion, making them ideal for use in wet rooms and external environments. The red tip also helps to provide a faster and more secure installation by cutting into the concrete more easily. Additionally, the approved adjustment feature allows the screw to be unscrewed twice to align the attached part, and then to be tightened again. This can be helpful for correcting mistakes during installation, or for adjusting the screw's position after it has been installed. A countersunk head provides a flush appearance,

    Product Features:

    • Specially hardened red tip: Faster and more secure installation.

    • A4 stainless steel concrete screw: Guarantees a high level of corrosion resistance especially for wet rooms and external applications.

    • Special saw tooth geometry: Enables fast cutting into the concrete.

    • Drill holes do not need to be cleaned during vertical installation (ceiling and floor): Fast installation (Note: For floor fixings the hole must be drilled 3x drill hole diameter deeper.)

    • ETA approval covers applications in cracked concrete and seismic power categories C1 and C2: Safe and approved.

    • Approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again: Precision fixing.

    • Three embedment depths: Allows use  in many different applications.

    • Short UltraCut FBS II R, with a reduced embedment in depth: Allows for a short drill hole depth, fast installation and less reinforcement hits.

    • Countersunk head: Neat and tidy finish
    • Guard rails

    • Consoles/Base plates

    • Metal profiles

    • Reinforcement of bridges

    • Rehabilitation of old and ailing buildings

    • Rehabilitation of car parks

    Approved for:

    • Concrete C20/25 to C50/60, cracked and non-cracked

    • Reinforcement of existing concrete structures

    Also suitable for:

    • Concrete C12/15

    • Solid building materials

    • Masonry with a dense structure

    Certification
    • ETA-15/0352

    • DoP 0184

    • DoP 0227

    • DoP No. 0078

    • DoP No. 0146

    Similar Products

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.