fischer ULTRACUT FBS II 10 x 80 25/15/- SK R countersunk head TX50, A4 stainless steel concrete screw [543583]
Unit of Measure Name:
50
Internal Reference:
543583
Description
The fischer ULTRACUT FBS II SK R Stainless steel concrete screws with specially hardened red tips are a versatile choice for a variety of applications. They are resistant to corrosion, making them ideal for use in wet rooms and external environments. The red tip also helps to provide a faster and more secure installation by cutting into the concrete more easily. Additionally, the approved adjustment feature allows the screw to be unscrewed twice to align the attached part, and then to be tightened again. This can be helpful for correcting mistakes during installation, or for adjusting the screw's position after it has been installed. A countersunk head provides a flush appearance,
Product Features:
Specially hardened red tip: Faster and more secure installation.
A4 stainless steel concrete screw: Guarantees a high level of corrosion resistance especially for wet rooms and external applications.
Special saw tooth geometry: Enables fast cutting into the concrete.
Drill holes do not need to be cleaned during vertical installation (ceiling and floor): Fast installation (Note: For floor fixings the hole must be drilled 3x drill hole diameter deeper.)
ETA approval covers applications in cracked concrete and seismic power categories C1 and C2: Safe and approved.
Approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again: Precision fixing.
Three embedment depths: Allows use in many different applications.
Short UltraCut FBS II R, with a reduced embedment in depth: Allows for a short drill hole depth, fast installation and less reinforcement hits.
- Countersunk head: Neat and tidy finish
Applications
Guard rails
Consoles/Base plates
Metal profiles
Reinforcement of bridges
Rehabilitation of old and ailing buildings
Rehabilitation of car parks
Building Materials
Approved for:
Concrete C20/25 to C50/60, cracked and non-cracked
Reinforcement of existing concrete structures
Also suitable for:
Concrete C12/15
Solid building materials
Masonry with a dense structure
Certification
ETA-15/0352
DoP 0184
DoP 0227
DoP No. 0078
DoP No. 0146