A more cost effective through bolt solution from fischer – with ETA approval for installation in non-cracked concrete. Installed with a few hammer blows into a pre-drilled hole. See installation instructions for details.
Concrete C20/25 to C50/60, non-cracked
You can find detailed information on building materials in the registration document.
DoP No. 0034
The FXA is suitable for pre-positioned and push through installation, also suitable for stand off installation under certain conditions.
Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
The head embossing offers a simple control of the anchoring.
|ETA Approval - Concrete Anchor
|Declaration of Performance 1
|Declaration of Performance 2