![fischer FAZ II 10/160 A4 M10 x 245 A4 stainless steel through bolt [501412]](/web/image/product.product/1661/image_1024/%5B501412%5D%20fischer%20FAZ%20II%2010-160%20A4%20M10%20x%20245%C2%A0A4%20stainless%20steel%20through%20bolt%C2%A0%5B501412%5D?unique=0197bb9)
![fischer FAZ II 10/160 A4 M10 x 245 A4 stainless steel through bolt [501412]](/web/image/product.product/1661/image_128/%5B501412%5D%20fischer%20FAZ%20II%2010-160%20A4%20M10%20x%20245%C2%A0A4%20stainless%20steel%20through%20bolt%C2%A0%5B501412%5D?unique=0197bb9)
fischer FAZ II 10/160 A4 M10 x 245 A4 stainless steel through bolt [501412]
Unit of Measure Name:
20
Internal Reference:
501412
Related Items:
![[77937] [77937] fischer through bolt setting tool FABS](/web/image/product.template/2149/image_1920/%5B77937%5D%20%5B77937%5D%20fischer%20through%20bolt%20setting%20tool%20FABS?unique=1a41fef)
Description
The FAZ II has a unique expansion clip and design which allows for fixing heavy loads securely into both cracked and non-cracked concrete. The high load capacity allows for fewer fixings points to be used, which saves on installation time, and fixings cost as fewer fixings can be used. The zinc-plated version is used for fixing in indoor areas. By using the shorter FAZ version, (also available for M8 FAZ II), reduced drill hole depths and smaller diameters result in faster installation times. The FAZ II is approved for seismic, and also for installation with hollow drills.
Applications
Steel constructions
Guard rails
Consoles
Ladders
Cable trays
Machines
Staircases
Gates
Façades
Timber constructions
Building Materials
Approved for:
Concrete C20/25 to C50/60, cracked and non-cracked
Also suitable for:
Concrete C12/15
Concrete C80/95 (classification available)
You can find detailed information on building materials in the registration document.
Certification
ETA-05/0069
DoP 0186
DoP No. 0009
DoP No. 0121
ESR-2948
Functionality
The FAZ II is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread.
When applying the torque, the cone bolt is pulled into the expansion sleeve and expand it against the drill hole wall.
The anchor is set in line with the approval once the preset installation torque is achieved.
- In the case of series installation, we recommend using the FABS anchor bolt setting tool.
| Document Name | Download |
| Declaration of Performance 1 | |
| Declaration of Performance 2 | |
| Declaration of Performance 3 | |
| ETA Approval | |
| ICC Approval | |
| Load Table |