[45572] Zinc through bolt fischer FBN II 16/25 K M16 x 130

Description

The fischer bolt anchor FBN II K is a steel anchor for cost-effective fixings in non-cracked concrete. The short version is suitable for pre-positioned installation and push-through installation. The bolt anchor is made of hot-dipped steel and is recommended for railings, handrails or consoles.

Product Features

• The standard anchorage depth achieves the maximum load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.

• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.

• The first bolt anchor with variable working life covers the usage of bolt anchors in wet conditions and outdoor areas.

• The long thread balances component tolerances and stand-off installations, and thus increases flexibility.

• Fewer hammer blows and the minimal torque slippage allow for a noticeably simpler assembly.

• The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture.

Applications

• Steel constructions

• Guard rails

• Consoles

• Ladders

• Machines

• Gates

• Façades

Building materials

• Approved for:

• Concrete C20/25 to C50/60, non-cracked

• Also suitable for:

• Concrete C12/15

• Natural stone with dense structure

• You can find detailed information on building materials in the registration document.

Permission

• ETA-07/0211

• ETA-18/0101

• DoP 0192

• DoP No. 0015

• DoP No. 0098

Functionality

• The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.

• Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).

• When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.

• The head embossing offers a simple control of the anchoring.

• In the case of series installation, we recommend using the FABS bolt anchor setting tool.

Documents for download